$265.95

Heavy Duty Rivet Nut Puller with 5 Metric size Mandrels 3 Tools in 1 FREE USA Mainland Shipping

 

   From DMSeeleysTools USA  This Professional quality Metric NCG Long arm Rivet Nut hand Tool kit is a higher end more heavy duty Rivet Riv Nut insert tool and can be used for Steel, Stainless Steel and Aluminum Rivet Nuts. You can tell just by picking it up that this Swivel Head Rivet Nut Tool is one of the better quality Riv nut tools. 

The NCG H9-3 has a 360 degree rotating head and It also has 5 different Metric size nose pieces or threaded rods which seems to be a quality improvement and go the full length through the Riveters head as seen in the pictures while other Rivet Nut Tools do not have full length rods. Sizes= (M-4, M-5, M-6, M-8, M-10).  With it's 3 in one capability this tool can also pull normal rivets 3.2 mm-6.4mm with 5 additional rivet nose pieces included. It can also pull rivet bolts with the purchase of the Rivet Bolt Mandrel set.

The Riv Nut tool requires access to only one side of the work piece. The Riv Nut can be installed after painting or other final finishing operations. Its ideal for materials that can't be tapped or welded and can be used with Aluminum or Steel Rivet Nuts.

This Rivet Nut tool has very long handles for improved leverage and to reach difficult spots with it's 360 degree rotating head has pictured.

This Higher end Riv nut tool includes 5 different size Rivet Nut Mandrel rods (M-4, M-5, M-6, M-8, M-10). Plus it includes 5 rivet nose pieces 3.2 mm-6.4 mm, 3 wrenches, 2 nose piece adapters and a Case. 

The Riv Nut tool requires access to only one side of the work piece. The Riv Nut can be installed after painting or other final finishing operations. Its ideal for materials that can't be tapped or welded and can be used with Aluminum or Steel Rivet Nuts.  

                            

         At least six full thread turns, even in thin materials.

 

        Only one operator is required from one side to use this Riv Nut hand tool.

 

 May be used as blind fastener or screw anchor.

 

       APPLICATIONS-- You can use the Riv Nut hand tool for automobiles, electric home appliances, electronics, building and construction. works like a rivet but has a threaded center. It's like putting a nut on the other side when only one side of the material is accessible. This also works well for stripped holes as an insert.

             

Contains: Heavy duty Professional Riv Nut Hand Tool setting tool and 5 different threaded  nose piece Rods to match the following Riv Nut sizes in Steel or Aluminum  Metric  M4, M5, M6, M8 and M-10. 5 Rivet Sizes 3.2 mm-6.4mm.  It also comes with NCG directions.

The Riv Nut Tool measures 23" in length and 5 " in width across the bottom of the handles with the handles closed and about 5 1/2" inches across from the insert tip to the end of the thumb wheel. 

ALSO Available!  Heavy Duty Stainless steel Riv Nuts @ DMSeeleysTools 

                                   Check my listings

 

                             Fair Deal Shipping FREE!

 

                                        Economy!

 

                                         Strength!

 

                                         Simplicity!

 

                                       Make it yours!

 

Fair Deal Shipping FREE US. Out side the US please request your Fair Deal Quote if not on the ship calculator stated.

 

Check out our other Riv Nut Riveters.

 

 

 

 

 

 Denny

 

 

 

 

 

DMSeeleysTools for your workshop rivet nut hand tools

 

 

 

 

Current Stock:
Weight: 8.00 LBS
Width: 8.00
Height: 4.00
Depth: 30.00
Shipping Cost: $265.95 (Fixed Shipping Cost)

No Reviews Write a Review